Journal of Scientific Dentistry

Register      Login

VOLUME 1 , ISSUE 1 ( January-June, 2011 ) > List of Articles

CASE REPORT

Fabrication of Interim Hollow Bulb Obturator Using Lost Salt Technique - A Case Report

Srinivasan J, Babu Rajan K, Smesh V

Keywords : Interimt hturator, lost salt technique, Maxi//ofacia/proszhesis

Citation Information : J S, Rajan K B, V S. Fabrication of Interim Hollow Bulb Obturator Using Lost Salt Technique - A Case Report. 2011; 1 (1):37-39.

DOI: 10.5005/jsd-1-1-37

License: CC BY-NC 4.0

Published Online: 01-08-2020

Copyright Statement:  Copyright © 2011; The Author(s).


Abstract

This report describes a simplified method for construction of an interim hollow bulb obturator for an acquired maxillary defect. Final impression was made with irreversible hydrocolloid and the master cast was blocked out with plaster. Wax up was done leaving thc hollow bulb open after acrylization, the defect was filled with table salt and selfcure resin was used to cover the defect. Later a small hole was made and the table salt was washed off in water and the hole was also filled with self cure resin, The obturator was well retained in the patient's mouth and markedly improved his ability to speak and swallow-This technique proved to be a simple, quick, and cost-effective method for construction ofhollcw bulb Obturators for acquired maxillary defects.


PDF Share
  1. Bhat V. A close up on obturators using magnets: Part II. J Indian Prosthodont Soc. 2006;6:148-53.
  2. Frame RT, King GE. A sulgical interim prosthesis. J Prosthet Dent 1981;45;108.
  3. Curtis TA- Beumer J. Maxillofacial rehabilitation Prosthodontic and surgical considerations St. Louis: Ishiyaku Euro America 1996:225-84.
  4. Aramany MA. Basic principles of obturator design for partially edentulous patients. Part I: classification. J Prosthet Dent 1978;40;554-57.
  5. Thomas D. Taylor. Clinical maxillofacial prosthetics 2000. Quintessiance publ:92-3.
  6. Kouyoumdjian JH, Chalian VA. An interim obturator prosthesis with duplicated teeth and palate. J Prosthet Dent 1984; 52:560-2_
  7. Mihoko Haraguchi, Hitoshi Mukohyama, Hisashi Taniguchi. A simple method of fabricating an interim obturator prosthesis by duplicating the existing teeth and palatal form. J Prosthet Dent 2006; 95:469-72.
  8. Varoujan Joe BD. Maxillofacial prosthetics multi disciplinary practice 1st edition. William and Wilkins pub]: 139 47.
  9. Shaker K-T. A silnplified technique for construction of an interim obtuator for a bilateral total maxillcetomy delZ•cl. Inl J Proslhodonl 2000;13: 166-68.
  10. Rilo B, Dasilva JL, 1, Mora MJ, Santana C. A hollow bulb interim obturator for maxillary resection. A case report. J Oral Rehabil. 2005;32(3);23.
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.